A
The AF focusing function can be only normally used with Nikon original flashes, so by using the AF lamp in the camera to address the issue, turn off the AF focusing function in the transmitter(C.Fn-06...
A
It is because the Nikon flash system are not allowed the signal from the camera hot shoe to the flash. When using X1N, can use TTL mode to calculate the other modes and outputs, so the flash must be s...
A
Push into the wide panel firmly.
A
Check the ZOOM, and see A or M displayed in the screen. A is Auto Zooming, and M is Manual Zooming.
A
The direction of the flash head have been changed, so that the flash head can not response to the flash body
A
Under TTL mode, have one test flash before normal flash, check the Anti-red eye function is on or not , since the function will make one more flash before normal flash.
  • Skype

  • Email

  • WhatsApp

  • Facebook

Click on the mailbox to send a key

Please select customer service to chat